LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> 6 s, 4D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System (L3)) >> Neutral Switch Inspection >> Continuity Inspection >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Continuity Inspection: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative battery cable.
  2. Remove the neutral switch.
  3. Inspect for continuity between the neutral switch terminals using an ohmmeter.
    • If the neutral switch is okay, but PID value is out of specification, perform the CIRCUIT OPEN/SHORT INSPECTION .
    • If not as specified, replace the neutral switch.