Specifications Index
B2300, B3000 & B4000 SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | CLIMATE CONTROL SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Axle Nut/Hub Nut | NA | ||
| Battery | BATTERY SPECIFICATIONS | ||
| Brakes | |||
| Bleeding Sequence | BLEEDING BRAKE SYSTEM | ||
| Disc Brakes | DISC BRAKE SPECIFICATIONS | ||
| Drum Brakes | DRUM BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Charging | |||
| Generator | GENERATOR SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Drive Belts | |||
| Adjustment | DRIVE BELT | ||
| Belt Routing | See appropriate graphic under DRIVE BELT ROUTING . | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | 14-18 psi | ||
| Thermostat R & I | |||
| 2.3L 4-Cyl. | THERMOSTAT REMOVAL/INSTALLATION -- 2.3L | ||
| 3.0L V6 | THERMOSTAT REMOVAL/INSTALLATION -- 3.0L | ||
| 4.0L V6 | THERMOSTAT REMOVAL/INSTALLATION -- 4.0L | ||
| Water Pump R & I | |||
| 2.3L 4-Cyl. | WATER PUMP REMOVAL/INSTALLATION -- 2.3L | ||
| 3.0L V6 | WATER PUMP REMOVAL/INSTALLATION -- 3.0L | ||
| 4.0L V6 | WATER PUMP REMOVAL/INSTALLATION -- 4.0L | ||
| Engine Mechanical | |||
| 2.3L 4-Cyl. | |||
| Compression | COMPRESSION TEST | ||
| Oil Pressure | 29-39 psi (2.0-2.7 kg/cm2 ) at 2000 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS -- 2.3L | ||
| Torque | TORQUE SPECIFICATIONS | ||
| 3.0L V6 | |||
| Compression | COMPRESSION TEST | ||
| Oil pressure | 40-60 psi (2.8-4.2 kg/cm2 ) at 2,500 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS --3.0L | ||
| Torque | TORQUE SPECIFICATIONS | ||
| 4.0L V6 | |||
| Compression | COMPRESSION TEST | ||
| Oil pressure | 40-60 psi (276-414 kPa) at 2,000 RPM | ||
| Overhaul | ENGINE SPECIFICATIONS --4.0L | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate/Drive Plate Torque | |||
| 2.3L 4-Cyl. | |||
| Automatic Transmission | 70.9-75.9 Ft. Lbs. (96.1-103 N.m) | ||
| Manual Transmission | 79.7-85.5 Ft. Lbs. (108-116 N.m) | ||
| 3.0L V6 | 59 Ft. Lbs. (80 N.m) | ||
| 4.0L V6 | |||
| First Step | 115 INCH Lbs. (13 N.m) | ||
| Final Step | 52 Ft. Lbs. (71 N.m) | ||
| Fuel System | |||
| Pressure Specification (At engine idle.) | 30-56 psi (207-386 kPa) | ||
| Fuel Pressure Test Procedure | PINPOINT TEST 10: FUEL LINE PRESSURE/FUEL PRESSURE HOLD INSPECTION | ||
| Fuel Filter Location and R & I | FUEL FILTER REMOVAL/INSTALLATION | ||
| Ignition | |||
| Firing Order & Cylinder Identification | |||
| 2.3L 4-Cyl. | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| 3.0L & 4.0L V6 | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Ignition Wires (Resistance) | HIGH TENSION WIRES RESISTANCE | ||
| Ignition Wires (Routing) | |||
| 2.3L 4-Cyl. | See graphic under FIRING ORDER - 2.3L . | ||
| 3.0L & 4.0L V6 | See graphic under FIRING ORDER - 3.0L & 4.0L . | ||
| Spark Plug | |||
| 2.3L 4-Cyl. (Motorcraft AGSF32FEC) | |||
| Gap | 0.041-0.045 in. (1.05-1.15 mm) | ||
| Torque | 7-15 Ft. Lbs. (9-20 N.m) | ||
| 3.0L V6 (Motorcraft AWSF32PP) | |||
| Gap | 0.042-0.046 in. (1.07-1.17 mm) | ||
| Torque | 7-15 Ft. Lbs. (9-20 N.m) | ||
| 4.0L V6 (Motorcraft AGSF-22PP) | |||
| Gap | 0.061-0.068 in. (1.57-1.73 mm) | ||
| Torque | 7-15 Ft. Lbs. (9-20 N.m) | ||
| Starting | |||
| Starter | SERVICE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 100 Ft. Lbs. (135 N.m) | ||