Tightening Specifications

Install the bolts. Tighten the bolts in the sequence shown in four steps.
1. Tighten the bolts to 80 Nm (8.2 kgf-m, 59 ft. lbs.).
2. Loosen the bolts one full turn.
3. Tighten to 45 - 55 Nm (4.6 - 6.6 kgf-m, 34 - 40 ft. lbs.).
4. Tighten to 85 - 99 Nm (8.7 - 10.1 kgf-m, 63 - 73 ft. lbs.).