LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> B4000 Base, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Emission System >> Dust Separator Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Dust Separator Removal/Installation

  1. Remove the evaporative emission canister. See EVAPORATIVE EMISSIONS CANISTER REMOVAL/INSTALLATION  .
  2. Disconnect the canister vent solenoid hose assembly.
    Fig 1: Removing EVAP Dust Separator - 2.3L
    G01937747Courtesy of MAZDA MOTORS CORP.
  3. Remove the EVAP dust separator.
    Fig 2: Installing EVAP Dust Separator - 2.3L
    G01937748Courtesy of MAZDA MOTORS CORP.
  4. Install in reverse order of removal.
  5. Perform Leak Test. See EVAPORATIVE EMISSION SYSTEM LEAK TEST  .
  6. Perform the Evaporative Emission Running Loss Monitor Repair Verification Drive Cycle Test. See DRIVE CYCLES .
scientia non olet · About LEMON Manuals