Washer Fluid-Level Sensor Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the washer tank. (See WASHER TANK REMOVAL/INSTALLATION [4SD] ) (See WASHER TANK REMOVAL/INSTALLATION [5HB, WGN] )
Remove in the order indicated in Fig 1.

Fig 1: Removal Order Of Washer Fluid-Level Sensor
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.

Fig 2: Removing/Installing Washer Fluid-Level Sensor
Courtesy of MAZDA MOTORS CORP.