LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Engine Controls - Service & Adjustment Specifications) >> Mechanical Checks >> Engine Compression
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Compression

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Mazda Tribute, 2002 Mazda Protege5, 2002 Mazda Protege, 2002 Mazda Millenia, and 2002 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Warm engine to normal operating temperature. Remove all spark plugs. Disconnect ignition coil primary wire connector. Hold throttle plate fully open. Crank engine and note compression pressure.

COMPRESSION SPECIFICATIONS

Application Minimum psi (kg/cm 2 ) @ RPM Standard psi (kg/cm 2 ) @ RPM
B2300 (1) (1)
B3000 & B4000 (1) (1)
Miata (2) 146 (10.3) @ 300 198 (13.9) @ 300
Millenia (2)
2.3L 120 (8.5) @ 250 164 (11.5) @ 250
2.5L 130 (9.3) @ 300 189 (13.3) @ 300
MPV (1) (1)
Protege & Protege5 (2)
2.0L 119 (8.4) @ 300 171 (12.0) @ 300
Tribute
2.0L (1) (1)
3.0L (1) (1)
626 (2)
2.0L 119 (8.4) @ 300 171 (12.0) @ 300
2.5L 141 (9.9) @ 250 202 (14.2) @ 250
(1) Lowest compression reading should not be less than 75 percent of highest compression reading.
(2) Difference between cylinders should not be more than 28 psi (2.0 kg/cm2 ).