Trunk Compartment Light Switch Inspection

WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Remove the trunk lid trim. (See TRUNK LID TRIM REMOVAL/INSTALLATION .)
Disconnect the trunk compartment light switch connector.
Inspect for continuity between the trunk compartment light switch terminals using an ohmmeter.
- If not as specified, replace the trunk lid lock.
Fig 1: Trunk Compartment Light Switch Position And Terminals Continuity Chart
Courtesy of MAZDA MOTORS CORP.

Fig 2: Identifying Trunk Compartment Light Switch Terminals
Courtesy of MAZDA MOTORS CORP.