Spark Plug Removal/Installation
WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- To avoid breaking the spark plug, be sure to fit the socket squarely over it.
- Disconnect the high-tension lead. (See IGNITION COIL REMOVAL/INSTALLATION .)
- Remove the ignition coil. (See IGNITION COIL REMOVAL/INSTALLATION .)
- Remove the spark plug.
- Install in the reverse order of removal.
Tightening torque
15-22 N.m {1.5-2.3 kgf.m, 11-16 ft.lbf}