Power Window Regulator Disassembly

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Tighten the adjusting bolt with pliers and loosen the cable.

Fig 1: Tightening Adjusting Bolt Using Pliers
Courtesy of MAZDA MOTORS CORP.
Disassemble the lower cable guide from the lower bracket with pliers.

Fig 2: Disassembling Lower Cable Guide From Lower Bracket
Courtesy of MAZDA MOTORS CORP.
Disassemble the upper cable guide from the upper bracket.

Fig 3: Disassembling Upper Cable Guide From Upper Bracket
Courtesy of MAZDA MOTORS CORP.
Disassemble the drum cover.
Take out the drum and disassemble the cable.

Fig 4: Removing Drum
Courtesy of MAZDA MOTORS CORP.
Pull the ends of the cables and disassemble from the carrier plate one at a time.

Fig 5: Removing Cables From Carrier Plate
Courtesy of MAZDA MOTORS CORP.
Disassemble the adjusting bolts.