Power Window Switch Inspection

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the power window switch. (See POWER WINDOW SWITCH REMOVAL/INSTALLATION .)
Inspect for the continuity between the power window switch terminals using an ohmmeter.
- If not as specified, replace the power window switch.
Fig 1: Power Window Switch Continuity Table
Courtesy of MAZDA MOTORS CORP.

Fig 2: Inspecting Power Window Switch Terminals
Courtesy of MAZDA MOTORS CORP.