LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 497 (Power Steering System) >> Steering Gear And Linkage Assembly >> Mounting Rubber Assembly Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Mounting Rubber Assembly Note

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply soapy water to the rubber part of the mounting rubber.
  2. Press the mounting rubber until the mounting rubber end comes out completely from the gear housing using the SSTs  and a press.
    Fig 1: Installing Mounting Rubber
    G01930655Courtesy of MAZDA MOTORS CORP.
  3. Reverse the gear housing, then press the mounting rubber until the mounting rubber end comes out completely from the other side. At this time, the mounting rubber end and steel pipe are aligned.
    Fig 2: Centering Mounting Rubber
    G01930656Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals