Door Module: Service and Repair

FRONT DOOR UNIT REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the following parts:
1. Inner garnish
2. Front door trim
3. Front door glass
4. Front door speaker

3. Disconnect the door lock actuator connector.
4. Remove the front door wiring harness from the front door unit.




5. Remove screw A.
6. Remove screws B and the fastener.
7. Remove the front door unit.




8. Remove the following parts:
- Front power window motor
- Front power window regulator
- Front door speaker amplifier

9. Install in the reverse order of removal.