LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> Tribute ES, 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle - Overhaul >> Chain Sprockets >> Assembly Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Assembly Note

  1. Position the No. 16 reverse/overdrive ring gear bearing on the special tools.
    1. Position the bearing with the part number facing toward the handle of the special tool.
    Fig 1: Positioning No. 16 Reverse/Overdrive Ring Gear Bearing On Special Tools
    G00985241Courtesy of MAZDA MOTORS CORP.
    NOTE:
    • The identification stamping of the bearing goes to the outboard side of the reverse/overdrive ring gear.
  2. Using the special tools, install the No. 16 reverse/overdrive ring gear bearing.
    Fig 2: Installing No. 16 Reverse/Overdrive Ring Gear Bearing
    G00985242Courtesy of MAZDA MOTORS CORP.
  3. Position the No. 17 stator support bearing on the special tools.
    1. Position the bearing with the part number facing toward the handle of the special tool.
      2. Fig 3: Positioning No. 17 Stator Support Bearing On Special Tools
      G00985243Courtesy of MAZDA MOTORS CORP.
    NOTE:
    • The identification stamping of the bearing goes to the outboard side of the reverse/overdrive ring gear.
  4. Using the special tools, install the No. 17 stator support bearing into the stator support sprocket.
    5. Fig 4: Installing No. 17 Stator Support Bearing Into Stator Support Sprocket
    G00985244Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals