Powertrain Control Module (PCM) Reset: Description: Notes
WARNING: This page is about a different car, the 2005 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
All OBDII scan tools support the PCM reset.
The PCM reset allows the scan tool to command the PCM to clear all emission-related diagnostic information. When resetting the PCM, a DTC P1000 will be stored in the PCM until all the OBD II system monitors or components have been tested to satisfy a drive cycle, without any other faults occurring.
The following events occur when a PCM reset is performed:
- Clears the number of DTCs
- Clears the DTCs
- Clears the freeze frame data
- Clears diagnostic monitoring test results
- Resets status of the OBD II system monitors Sets DTC P1000
NOTE:
- This function is performed only after retrieval of continuous DTCs.