Using The Worldwide Diagnostic System (WDS) When The Original Body Chassis Electrical Module Is Available
WARNING: This page is about a different car, the 2005 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the WDS or equivalent Tester and ID the vehicle as normal.
- From the Toolbox icon, select and highlight: Module Programming and press the check mark.
- Select and highlight: Programmable Module Installation.
- Follow the on-screen instructions and turn the ignition key to the OFF position and press the check mark.
- Install the new module and press the check mark.
- Follow the on-screen instructions and turn the ignition key to the ON position and press the check mark.
- Module configuration is complete.
- Test the module for correct operation.