Back-Up Light Switch Inspection

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the back-up light switch connector.
Inspect for continuity between the back-up light switch terminals using an ohmmeter.
- If not as specified, replace the back-up light switch.
Fig 1: Back-Up Light Switch Continuity Table
Courtesy of MAZDA MOTORS CORP.

Fig 2: Inspecting Back-Up Light Switch Connector Terminals
Courtesy of MAZDA MOTORS CORP.