LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2005 >> MPV ES >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle [Shift Mechanism] >> Position Switch (Built-In Selector Lever) Inspection >> Continuity Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Continuity Inspection

  1. Disconnect the negative battery cable.
  2. Remove the column cover.
  3. Disconnect the connector.
  4. Inspect the continuity.
    Fig 1: Selector Lever Continuity Table
    G03700611Courtesy of MAZDA MOTORS CORP.
    Fig 2: Identifying P Position Switch Side Connector Terminal
    G03700612Courtesy of MAZDA MOTORS CORP.
  5. Connect the connector.
  6. Install the column cover.
  7. Connect the negative battery cable.
scientia non olet · About LEMON Manuals