LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2005 >> MX-5 Miata Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic [Engine Control System BP, BP With TC] >> After Repair Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

After Repair Procedure

  1. Connect WDS or equivalent to the vehicle DLC-2 16-pin connector located the left side of the center console.
    Fig 1: Locating Vehicle DLC-2 16-Pin Connector
    G03637550Courtesy of MAZDA MOTORS CORP.
  2. Turn the ignition key from OFF to ON.
  3. Record DTC if retrieved.
  4. Erase all diagnostic data by WDS or equivalent
scientia non olet · About LEMON Manuals