LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> 3 i, 2.0 F, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Intake Air Temperature (IAT) Sensor Inspection >> Resistance Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Resistance Inspection

  1. Disconnect the mass air flow sensor connector.
  2. Verify that the resistance between MAF sensor terminals D and E is within the specification.
    • If the monitor item status/specification (reference) is not within the specification, even though the IAT sensor resistance is within the specification, perform Circuit Open/Short Inspection .
    • If not within the specification, replace the MAF sensor.

      Standard 

      AMBIENT TEMPERATURE (°C{°F}) AND RESISTANCE CHART

      Ambient temperature (°C{°F}) Resistance (kohm)
      -20 {-4.0} 13.6-18.4
      20 {68} 2.21-2.69
      60 {140} 0.493-0.667
      Fig 1: Intake Air Temperature (IAT) Sensor Connector Terminals
      G04313889Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals