LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> 5 L4-2.3L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Testing and Inspection >> Scan Tool Testing and Procedures >> PID/Data Monitor and Record Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

PID/Data Monitor and Record Procedure

PID/Data Monitor and Record Procedure





1. Connect the WDS or equivalent to the vehicle DLC-2 connector.
2. Access and monitor PIDs using the WDS or equivalent.

Active Command Modes Procedure





1. Connect the WDS or equivalent to the vehicle DLC-2 16-pin connector.
2. Turn the ignition switch to the ON position (engine off) or start the engine.
3. Activate active command modes using the WDS or equivalent.
scientia non olet · About LEMON Manuals