LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> 6 Mazdaspeed >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (On-Board Diagnostic [Engine Control System L3)) >> DTC P0602 >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC P0602: Notes

WARNING: This page is about a different variant/trim than selected.
DTC P0602 DETECTION CONDITION AND POSSIBLE CAUSES

DTC P0602 PCM programming error
DETECTION CONDITION 
  • No configuration data in PCM
    NOTE:
    • When the configuration is completed, DTC P0602 is cleared.

Diagnostic support note 
  • This is a continuous monitor (CCM).
  • MIL illuminates if PCM detects the above malfunction condition during first drive cycle.
  • PENDING CODE is available if PCM detects the above malfunction condition.
  • FREEZE FRAME DATA is available.
  • DTC is stored in PCM memory.
POSSIBLE CAUSE 
  • Complete configuration has not been completed.
  • PCM malfunction
scientia non olet · About LEMON Manuals