DTC P0610: Notes
WARNING: This page is about a different variant/trim than selected.
DTC P0610 DETECTION CONDITION AND POSSIBLE CAUSES
| DTC P0610 |
Control module vehicle options error |
| DETECTION CONDITION |
- PCM data configuration error
Diagnostic support note
- This is a continuous monitor (CCM).
- MIL illuminates if PCM detects the above malfunction condition during first drive cycle.
- PENDING CODE is available if PCM detects the above malfunction condition.
- FREEZE FRAME DATA is available.
- DTC is stored in PCM memory.
|
| POSSIBLE CAUSE |
- Configuration procedure has not been completed.
- PCM malfunction
|