LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> 6 Mazdaspeed >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (On-Board Diagnostic [Engine Control System L3)) >> OBD-II Drive Mode >> PCM Adaptive Memory Production Drive Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

PCM Adaptive Memory Production Drive Mode

WARNING: This page is about a different variant/trim than selected.
  1. Start the engine and warm it up completely.
  2. Verify the following conditions and correct if necessary:
    • All accessory loads (A/C, headlights, blower fan, rear window defroster) are off.
    • Initial ignition timing and idle speed are within the specification.
  3. Perform no load racing at the engine speed shown in the graph, then idle the engine for more than 60 s  after the cooling fan has stopped. If possible, monitor RPM PID for engine speed during this procedure.