LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> B2300 Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Instrumentation/Driver Info >> Key-In-Ignition Warning Switch >> Removal and Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation

  1. Remove the ignition lock cylinder. See IGNITION LOCK CYLINDER - FUNCTIONAL or see IGNITION LOCK CYLINDER - NON FUNCTIONAL .
    Fig 1: Removing/Installing Key-In-Ignition Warning Switch
    G04310579Courtesy of MAZDA MOTORS CORP.
  2. Remove the key-in-ignition warning switch.
    1. Pry the clip downward.
    2. Release the key-in-ignition warning switch from the rear of the ignition lock cylinder.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals