Restraints Control Module (RCM)

The RCM is on the ISO 9141 communication network. The RCM controls the deployment of the air bags based on sensor input. Check the ISO 9141 network circuit between the RCM 0810-101 and the DLC D-01. The total resistance value must not be more than 5 ohms.

If the resistance is more than 5 ohms, there is an open circuit in the ISO 9141 communication network, damage to the DLC D-01, damage to the RCM 0810-101, or a problem in the in-line connector. For additional RCM information, see AIR BAG AND SAFETY BELT PRETENSIONER SUPPLEMENTAL RESTRAINT SYSTEM (SRS) .