Lumbar Support Motor Inspection

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the lumbar support motor connector.
Connect battery positive voltage to lumbar support motor terminal A or B, then verify that the lumbar support motor operate as shown in Fig 1 .

Fig 1: Motor Operation/Connection
Courtesy of MAZDA MOTORS CORP.

If the lumbar support motor does not operate as indicated, replace the lumbar support motor. See Fig 2 .

Fig 2: Inspecting Lumbar Support Motor
Courtesy of MAZDA MOTORS CORP.