LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> B3000 Base, Standard >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Ignition Lock Cylinder - Functional >> Removal and Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation

  1. Disconnect the negative battery cable. See BATTERY DISCONNECT .
  2. Insert the ignition key and turn to the RUN position.
  3. Press the ignition lock cylinder release pin and remove the ignition lock cylinder.
  4. To install, reverse the removal procedure.
    • Verify ignition lock cylinder operation.
scientia non olet · About LEMON Manuals