DTC P0762: Notes

DTC P0762 DETECTION CONDITION AND POSSIBLE CAUSES

DTC P0762	Shift solenoid C malfunction (stuck on)
DETECTION CONDITION	Difference between actual gear ratio and gear ratio set in TCM is large. Diagnostic support note: This is continuous monitor (CCM). MIL illuminates if TCM detects the above malfunction condition. PENDING CODE is not available. FREEZE FRAME DATA is available. O/D OFF indicator light does not flash. DTC is stored in TCM memory.
POSSIBLE CAUSE	Shift solenoid C malfunction Stuck shift valve C TCM malfunction

DTC P0762

Shift solenoid C malfunction (stuck on)

DETECTION CONDITION

Diagnostic support note:

POSSIBLE CAUSE