LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> MPV LX >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic [Engine Control System (AJ)] >> On-Board Diagnostic Test >> On-Board System Readiness Tests Access Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

On-Board System Readiness Tests Access Procedure

  1. Perform the necessary vehicle preparation and visual inspection.
  2. Connect WDS or equivalent to the vehicle DLC-2 16-pin connector located on the left side of the center console.
  3. Monitor the OBD-II system's operating status by WDS or equivalent.
Fig 1: Locating DLC-2 Connector
G04328323Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals