LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> MPV V6-3.0L DOHC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Testing and Inspection >> Component Tests and General Diagnostics >> Using the SST (WDS or Equivalent)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using the SST (WDS or Equivalent)

PCM Inspection Using the SST (WDS or equivalent)

NOTE: PIDs for the following parts are not available on this model. Go to the appropriate part inspection.
- CMP sensor.
- Main relay.

1. Connect the WDS or equivalent to the DLC-2. (See ON-BOARD DIAGNOSTIC TEST [AJ].)
2. Turn the ignition switch to ON.
3. Measure the value.
- If the value is not within the specification, follow the instructions in Action column.
scientia non olet · About LEMON Manuals