LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> MX-5 Miata Base >> Repair and Diagnosis >> Brakes >> Traction Control >> On-Board Diagnostic [Dynamic Stability Control System) >> DTC Table >> PID/DATA Monitor Table
April 5, 2026: LEMON Manuals is launched! Read the announcement.

PID/DATA Monitor Table

PID/DATA MONITOR TABLE

PID name (definition) Unit/Condition Operation condition (reference) Action DSC HU/CM terminal
ABS_VOLT (System battery voltage value) V
  • Ignition switch at ON: Approx. 12.2 V 
  • Idling: Approx. 14.1 V 
 Inspect power supply circuit. (See DSC SYSTEM INSPECTION .) J
ABSLF_I
(Left front inlet solenoid valve output state)		 On/Off
  • Solenoid valve activated: On
  • Solenoid valve not activated: Off
 Inspect the DSC HU/CM.
(See DSC HU/CM INSPECTION .)		 -
ABSLF_O
(Left front outlet solenoid valve output state)		 On/Off
  • Solenoid valve activated: On
  • Solenoid valve not activated: Off
 Inspect the DSC HU/CM.
(See DSC HU/CM INSPECTION .)		 -
ABSLR_I
(Left rear inlet solenoid valve output state)		 On/Off
  • Solenoid valve activated: On
  • Solenoid valve not activated: Off
 Inspect the DSC HU/CM.
(See DSC HU/CM INSPECTION .)		 -
ABSLR_O
(Left rear outlet solenoid valve output state)		 On/Off
  • Solenoid valve activated: On
  • Solenoid valve not activated: Off
 Inspect the DSC HU/CM.
(See DSC HU/CM INSPECTION .)		 -
ABSPMPRLY
(Motor relay output state)		 On/Off
  • Relay activated: On
  • Relay not activated: Off
 Inspect the DSC HU/CM.
(See DSC HU/CM INSPECTION .)		 -
ABSRF_I
(Right front inlet solenoid valve output state)		 On/Off
  • Solenoid valve activated: On
  • Solenoid valve not activated: Off
 Inspect the DSC HU/CM.
(See DSC HU/CM INSPECTION .)		 -
ABSRF_O
(Right front outlet solenoid valve output state)		 On/Off
  • Solenoid valve activated: On
  • Solenoid valve not activated: Off
 Inspect the DSC HU/CM.
(See DSC HU/CM INSPECTION .)		 -
ABSRR_I
(Right rear inlet solenoid valve output state)		 On/Off
  • Solenoid valve activated: On
  • Solenoid valve not activated: Off
 Inspect the DSC HU/CM.
(See DSC HU/CM INSPECTION .)		 -
ABSRR_O
(Right rear outlet solenoid valve output state)		 On/Off
  • Solenoid valve activated: On
  • Solenoid valve not activated: Off
 Inspect the DSC HU/CM.
(See DSC HU/CM INSPECTION .)		 -
ABSVLVRLY
(Fail-safe relay output state)		 On/Off
  • Fail-safe relay is activated: On
  • Fail-safe relay is deactivated: Off
 Inspect DSC HU/CM.
(See DSC HU/CM INSPECTION .)		 -
BOO_ABS
(Brake pedal switch input)		 On/Off
  • Brake pedal depressed: On
  • Brake pedal released: Off
 Inspect the brake switch. N
CCNTABS
(Number of continuous codes)		 -
  • DTCs detected: 1-255 
  • No DTCs detected: 0 
 Perform the DTC inspection. -
LAT_ACCL G
  • Vehicle stopped or driving at constant speed: 0 G 
  • Cornering to right: Changes 0 G-positive 
  • Cornering to left: Changes 0 G-negative 
 Inspect the combined sensor. AI
LF_WSPD
(Left front ABS wheel-speed sensor input)		 KPH, MPH
  • Vehicle stopped: 0 KPH, 0 MPH 
  • Vehicle running: vehicle speed
 Inspect the ABS wheel-speed sensor. F, E
LR_WSPD
(Left rear ABS wheel-speed sensor input)		 KPH, MPH
  • Vehicle stopped: 0 KPH, 0 MPH 
  • Vehicle running: Vehicle speed
 Inspect the ABS wheel-speed sensor. G, H
MCYLI P Pa, psi
  • Brake pedal released: 0 Pa, 0 psi 
  • Brake pedal depressed: Changes according to the brake fluid pressure
 Inspect the brake fluid pressure sensor. -
PMP_MOTOR
(Pump motor output state)		 On/Off
  • Pump motor activated: On
  • Pump motor not activated: Off
 Inspect the DSC HU/CM.
(See DSC HU/CM INSPECTION .)		 -
RF_WSPD
(Right front ABS wheel-speed sensor input)		 KPH, MPH
  • Vehicle stopped: 0 KPH, 0 MPH 
  • Vehicle running: vehicle speed
 Inspect the ABS wheel-speed sensor. M, O
RPM
(Engine speed signal input)		 RPM
  • Engine stopped: 0 RPM 
  • Engine speed at 3,000 rpm: 3,000 RPM 
 Inspect the PCM. Inspect the instrument cluster. -
RR_WSPD
(Right rear ABS wheel-speed sensor input)		 KPH, MPH
  • Vehicle stopped: 0 KPH, 0 MPH 
  • Vehicle running: Vehicle speed
 Inspect the ABS wheel-speed sensor. I, L
SWA_POS °
  • Steering wheel in neutral position (not turned): 0° 
  • Steering wheel turned to left: Changes 0°-negative 
  • Steering wheel turned to right: Changes 0°-positive 
 Inspect the steering angle sensor. -
TPI %
  • Closed throttle position: 0% 
  • Wide open throttle: Changes according to throttle valve opening angle
 Inspect the throttle position sensor. -
V_STB_L
(LF stability control solenoid valve output state)		 On/Off
  • Solenoid valve activated: On
  • Solenoid valve not activated: Off
 Inspect the DSC HU/CM.
(See DSC HU/CM INSPECTION .)		 -
V_STB_R
(RF stability control solenoid valve output state)		 On/Off
  • Solenoid valve activated: On
  • Solenoid valve not activated: Off
 Inspect the DSC HU/CM.
(See DSC HU/CM INSPECTION .)		 -
V_TRC_L
(LF traction control solenoid valve output state)		 On/Off
  • Solenoid valve activated: On
  • Solenoid valve not activated: Off
 Inspect the DSC HU/CM.
(See DSC HU/CM INSPECTION .)		 -
V_TRC_R
(RF traction control solenoid valve output state)		 On/Off
  • Solenoid valve activated: On
  • Solenoid valve not activated: Off
 Inspect the DSC HU/CM.
(See DSC HU/CM INSPECTION .)		 -
YAW_RATE °/s
  • Vehicle stopped or driving straight: 0°/s 
  • Cornering to left: Changes 0°/s-negative 
  • Cornering to right: Changes 0°/s-positive 
 Inspect the combined sensor. AA
scientia non olet · About LEMON Manuals