Gear Sensor/Switch: Service and Repair

NEUTRAL SWITCH REMOVAL/INSTALLATION [G35M-R]





1. Remove the undercover.
2. Remove the No.1 engine mount rubber and No.1 engine mount bracket.





3. Remove the neutral switch.
4. Install the neutral switch (with a new packing) to the transaxle case.

Tightening torque 19.6 - 29.4 N-m (2.0 - 2.9 kgf-m, 14.5 - 21.6 ft-lbf)





5. Install the No.1 engine mount bracket.

Tightening torque 93.1 - 116.6 N-m (9.5 - 11.8 kgf-m, 68.7 - 85.9 ft-lbf)

6. Install the No.1 engine mount rubber.
7. Install the under cover.