LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> 3 Mazdaspeed, 2.3 M >> Repair and Diagnosis >> External Pages >> Different car >> Section 609 (Security System And Locks System (Advanced Keyless System)) >> Card Key Id Code Registration[Advanced Keyless System] >> With two programmed card keys
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With two programmed card keys

WARNING: This page is about a different car, the 2007 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Bring the programmed card keys (2) and a unprogrammed card key into the vehicle.
  2. Close all doors.
  3. Insert the supplementary key into the ignition key cylinder.
    NOTE:
    • Complete the procedures up to Step 7 within 30 s  after the supplementary key is inserted.
  4. Turn the ignition switch to the ON position.
  5. Press the UNLOCK button on card key 1.
  6. Press the UNLOCK button on card key 2.
  7. From the ignition switch in the ON position, switch the ignition switch in the order indicated below.
    • ACC→ON→ACC→ON→ACC→ON
  8. Open the driver-side front door, press the door switch twice  , and then close the door.
    NOTE:
    • After Step 3 is completed and the card key programming mode is activated, the door lock actuator operates to lock, and then operates to unlock.
    • If the door lock actuator does not operate, repeat the procedure from Step 2.
  9. Press the UNLOCK button on the unprogrammed card key twice. 
    NOTE:
    • After Step 8 is completed and the card key is programmed, the door lock actuator operates to lock, and then operates to unlock.
  10. If programming more card keys, remove the supplementary key once, and then repeat the procedure from Step 2.
scientia non olet · About LEMON Manuals