LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> 3 Mazdaspeed, 2.3 M >> Repair and Diagnosis >> External Pages >> Different car >> Section 609 (Security System And Locks System (Advanced Keyless System)) >> Clearing Card Key[Advanced Keyless System]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Clearing Card Key[Advanced Keyless System]

WARNING: This page is about a different car, the 2007 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fully lower the driver-side door glass.
  2. Connect the M-MDS to the DLC-2.
  3. Pull out the M-MDS cable from the door glass opening and set the M-MDS outside the vehicle.
    CAUTION:
    • Protect the cable and body contact area with a clean rag, otherwise they could be damaged.
    Fig 1: Identifying DLC-2 Connector
    G04931205Courtesy of MAZDA MOTORS CORP.
  4. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select "BODY"
      2. Select "SECURITY"
    • When using the PDS (Pocket PC)
      1. Select "Programming".
  5. Then, select items from the screen menu in the following order.
    1. Select "PATS functions".
    2. Select "Card Key Code Erase".
  6. Security access begins and the M-MDS displays the "OUT-CODE".
    NOTE:
    • When "OUT-CODE" is first displayed, turning the ignition switch from the LOCK to the ON position 5 times  will change the "OUT-CODE".
  7. Input the "IN-CODE" that corresponds to the "OUT-CODE" displayed in the M-MDS screen.
scientia non olet · About LEMON Manuals