Security Access Procedure[Advanced Keyless System]

WARNING: This page is about a different car, the 2007 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Connect the M-MDS to the DLC-2.
Select "BODY/SECURITY/PATS functions" from the M-MDS screen menu.
Select the items to be performed from the following:
- Program Additional card key
- Card Key Code Erase
- Steering Lock Unit Programming
- Program additional ignition key (with immobilizer system)
- Ignition Key Code Erase (with immobilizer system)
- Customer Spare Key Programming Enable (with immobilizer system)
- Customer Spare Key Programming Disable (with immobilizer system)
The security access begins and the M-MDS displays the "OUT-CODE".

Fig 1: Identifying DLC-2 Connector
Courtesy of MAZDA MOTORS CORP.
NOTE:
- When "OUT-CODE" is first displayed, turning the ignition switch from the LOCK to the ON position 5 times will change the "OUT-CODE".
Input "IN-CODE" corresponding to "OUT-CODE" displayed on the M-MDS screen.
If the security access is successful, selected item can be performed.