Top Lock Switch Inspection[Advanced Keyless System]

WARNING: This page is about a different car, the 2007 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front header trim. (See FRONT HEADER TRIM REMOVAL/INSTALLATION .)
Disconnect the striker switch connector.
Verify that the continuity between the striker switch terminals is as indicated in the table.
- If not as indicated in the table, replace the striker.
: Continuity

Fig 1: Striker Switch Continuity Chart
Courtesy of MAZDA MOTORS CORP.

Fig 2: Identifying Striker Switch Terminals With Circuit
Courtesy of MAZDA MOTORS CORP.