Trunk Lid Open Cancel Switch Removal/Installation[Advanced Keyless System]
WARNING: This page is about a different car, the 2007 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] .)
- Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION .)
- Squeeze the tabs of the trunk lid opener cancel switch and pull it forward to remove it.
- Disconnect the trunk lid opener cancel switch connector.
- Remove the trunk lid opener cancel switch.
- Install in the reverse order of removal.