Two-step Down Function Inspection

The distance the door glass opens can be changed using the two-step down function (approx. 20-100 mm {0.79-3.93 in}) .
The two-step down function can be made inoperative. (The function is operative at the initial setting).
The two-step down function does not function during IG OFF timer.
NOTE:
- Perform the following inspection for the power window main switch and the power window subswitches for each window.

TWO-STEP DOWN FUNCTION INSPECTION CHART

STEP	INSPECTION		ACTION
1	Turn the ignition switch to the ON position. Raise door glass completely. When the door glass is lowered using manual mode, does it move down to approx. 30 mm {1.2 in} from the completely closed position and stop for 1 s? (This inspection cannot be performed during IG OFF timer function operation).	Yes	Two-step down function is normal. Reinspect malfunction symptoms.
1		No	Perform the power window initialization procedure and verify auto-up/down operation. (See POWER WINDOW INITIALIZATION PROCEDURE. ) If the automatic function does not operate, go to AUTOMATIC DOOR GLASS RETURN FUNCTION INSPECTION . If the automatic function operates but the two-step down function does not, replace the power window switch.