Power Window Regulator Removal/Installation

WARNING: This page is about a different car, the 2007 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Remove the battery cover.
Disconnect the negative battery cable.(See BATTERY REMOVAL/INSTALLATION [LF] .)
Remove the door trim.(See DOOR TRIM REMOVAL/INSTALLATION .)
Remove the door unit.(See DOOR UNIT REMOVAL/INSTALLATION .)
Remove the door glass.(See DOOR GLASS REMOVAL/INSTALLATION ..)
Remove the nuts.

Fig 1: Regulator Nuts With Torque Specifications
Courtesy of MAZDA MOTORS CORP.
Remove the power window regulator.
Install in the reverse order of removal.

Fig 2: Identifying Power Window Regulator

Courtesy of MAZDA MOTORS CORP.