LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis >> External Pages >> Different car >> Section 609 (Glass/Windows/Mirrors) >> Windshield Removal >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Windshield Removal: Notes

WARNING: This page is about a different car, the 2007 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery cover.
  2. Disconnect the negative battery cable.(See BATTERY REMOVAL/INSTALLATION [LF] .)
  3. Remove the following parts:
    1. Wiper arm and blade (See WIPER ARM AND BLADE REMOVAL/INSTALLATION .)
    2. Cowl grille (See COWL GRILLE REMOVAL/INSTALLATION .)
    3. Side cowl grille (See SIDE COWL GRILLE REMOVAL/INSTALLATION .)
    4. Windshield garnish (See WINDSHIELD GARNISH REMOVAL .)
    5. Rearview mirror (See REARVIEW MIRROR REMOVAL/INSTALLATION .)
    6. Front header trim (See FRONT HEADER TRIM REMOVAL/INSTALLATION .)
    7. Map light (See MAP LIGHT REMOVAL/INSTALLATION .)
    8. A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION .)
  4. Apply protective tape along the edge of the body.
    NOTE:
    • Overlap and adhere the protective tape to the corners to prevent damage.
  5. Remove the windshield molding by pulling it outward.
Fig 1: Identifying Protective Tape
G04931253Courtesy of MAZDA MOTORS CORP.
NOTE:
  • If the windshield molding is difficult to remove, warm the windshield molding using a hot air blower.
  • The windshield molding is a replacement part.
scientia non olet · About LEMON Manuals