LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis >> External Pages >> Different car >> Section 611 (Security System And Locks System (Keyless Entry System)) >> Immobilizer System Component Replacement/Key Addition And Clearing[Keyless Entry System] >> No.6 Security Access Procedure >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

No.6 Security Access Procedure: Procedure

WARNING: This page is about a different car, the 2007 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the M-MDS to the DLC-2.
  2. Select "Body/Security/PATS function" from the M-MDS screen menu.
  3. Security access is started and the M-MDS displays "Outcode".
    CAUTION:
    • After reading out the outcode, do not turn ignition switch from LOCK to ON position 5 times, otherwise the outcode value will be changed.
  4. Input the corresponding "Incode" for the "Outcode" displayed on the M-MDS screen.
  5. After successfully performing security access, "Program Additional Ignition Key", "Ignition key ID number Erase" or "Customer Spare Key Programming Enable/Disable" is displayed on the M-MDS screen. When performing "Parameter Reset", security access is requested two times and after successfully performing it the second time, "Replacement Module" is displayed.
scientia non olet · About LEMON Manuals