Discharge Headlight Control Module Removal/Installation
WARNING: This page is about a different car, the 2007 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
- Incorrect servicing of the discharge headlights could result in electrical shock. Before servicing the discharge headlights, always refer to the discharge headlight service warnings. (See DISCHARGE HEADLIGHT SERVICE WARNINGS ).
- Disconnect the negative battery cable.
- Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION .)
- Remove the front combination light. (See FRONT COMBINATION LIGHT REMOVAL/INSTALLATION ).
- Remove screws.
- Disconnect the connector.
- Remove the discharge headlight control module.
- Install in the reverse order of removal.