LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis >> External Pages >> Different car >> Section 687 (Lighting System) >> Headlight Leveling Switch Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Headlight Leveling Switch Removal/Installation

WARNING: This page is about a different car, the 2007 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Detach the hood release lever from the lower panel. (See HOOD LATCH AND RELEASE LEVER REMOVAL/INSTALLATION .)
  3. Remove the front scuff plate. (Driver's side) (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
  4. Remove the front side trim. (Driver's side) (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
  5. Remove the lower panel. (See LOWER PANEL REMOVAL/INSTALLATION .)
  6. Remove the headlight leveling switch
  7. Disconnect the headlight leveling switch connector.
  8. Install in the reverse order of removal.
    Fig 1: View Of Headlight Leveling Switch
    G04957038Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals