LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Steering Gear And Linkage Assembly >> Mounting Rubber Assembly Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Mounting Rubber Assembly Note

  1. Apply soapy water to the rubber part of the mounting rubber.
  2. Press the mounting rubber until the mounting rubber end comes out completely from the gear housing using the SSTs  and a press.
    Fig 1: Assembling Mounting Rubber
    G04326555Courtesy of MAZDA MOTORS CORP.
  3. Reverse the gear housing, then press the mounting rubber until the mounting rubber end comes out completely from the other side. At this time, mounting rubber end and steel pipe are aligned.
    Fig 2: Aligning Mounting Rubber End And Steel Pipe
    G04326556Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals