Trunk Lid Opener Removal/Installation[Advanced Keyless System]
WARNING: This page is about a different car, the 2007 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] .)
- Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION .)
- Detach the rod.
- Disconnect the trunk lid opener connector and the trunk compartment light connector.
- Remove the bolts, then remove the trunk lid opener.
- Install in the reverse order of removal.