DTC P2229: Notes
WARNING: This page is about a different variant/trim than selected.
DTC P2229 DETECTION CONDITION AND POSSIBLE CAUSES
| DTC P2229 |
BARO sensor circuit high input |
| DETECTION CONDITION |
- PCM monitors the input voltage from the BARO sensor. If the input voltage at the PCM is above 4.45 V
, the PCM determines that the BARO sensor circuit has a malfunction.
Diagnostic support note
- This is a continuous monitor (CCM).
- MIL illuminates if the PCM detects the above malfunction condition during the first drive cycle.
- FREEZE FRAME DATA is available.
- DTCs are stored in the PCM memory.
|
| POSSIBLE CAUSE |
- BARO sensor malfunction
- PCM malfunction
|