DTC P2610: Notes
WARNING: This page is about a different variant/trim than selected.
DTC P2610 DETECTION CONDITION AND POSSIBLE CAUSES
| DTC P2610 |
PCM internal engine off timer performance |
| DETECTION CONDITION |
- PCM internal engine off timer is damaged.
Diagnostic support note
- This is a continuous monitor (CCM).
- The MIL illuminates if the PCM detects the above malfunction condition in two consecutive drive cycles or in one drive cycle while the DTC for the same malfunction has been stored in the PCM.
- PENDING CODE is available if the PCM detects the above malfunction condition during the first drive cycle.
- FREEZE FRAME DATA is available.
- DTCs are stored in the PCM memory.
|
| POSSIBLE CAUSE |
- PCM internal engine off timer is damaged.
|