Quick Test: Notes

WARNING: This page is about a different car, the 2001 Mazda Tribute, 2001 Mazda B4000, 2001 Mazda B3000, 2001 Mazda B2500, and 2001 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If vehicle has an emission compliance failure symptom, go to EMISSIONS COMPLIANCE under SYMPTOMS in TROUBLE SHOOTING - NO CODES article.

Quick Test is divided into 3 specialized test procedures that are functional tests of EEC-V system. All self-tests are completely menu driven using the New Generation Star (NGS) scan tool. The following procedures must be followed in sequence to avoid misdiagnosis:

Complete QUICK TEST before performing any system tests. Record any DTCs retrieved. Service DTCs in the following order: KOEO DTCs, KOER DTCs, then Continuous Memory DTCs and service first DTC output. If servicing Continuous Memory DTCs, retrieve any available freeze frame data. See FREEZE FRAME DATA MODE . Disregard any identical or related Continuous Memory DTCs if previously serviced. After each service or repair procedure has been completed, always repeat QUICK TEST procedures to ensure all EEC-V systems are working properly and DTCs are no longer present.