Hood Latch And Release Lever Removal/Installation: Notes

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

To remove the hood latch, remove the seal plate. (See FRONT BUMPER REMOVAL/INSTALLATION .)
Remove in the order indicated in the table.

Fig 1: Removal/Installation Hood Latch And Release Lever With Torque Specification
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.
Adjust the hood. (See HOOD ADJUSTMENT .)