Manual Transmission And Clutch Specifications: Notes
General Specifications
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Transmission | 5-Speed |
| Clutch Control | Hydraulic |
| Clutch Pedal Type | Suspended |
| Flywheel Maximum Runout | 0.2 mm (0.008 inch) |
| Clutch Disc Lining Depth | 0.3 mm (0.012 inch) minimum |
| Clutch Disc Runout | 0.7 mm (0.0276 inch) maximum |
| Tension Spring Adjustment | 14.0 mm (0.55 inch) maximum |
| System Adjustment Clutch | Automatic |
| Clutch Fluid | SAE J1703, FMUSS116 DOT-3 |
| Output Shaft Maximum Runout mm (in) | 0.05 (0.002) |
| Shift Fork to Synchronizer Sleeve mm (in) | 0.8(0.031) |
| Synchronizer Blocking Ring to Gear mm (in) | 1.5(0.059) |
| Third/Fourth Clutch Hub End Play mm (in) | 0.00-0.05(0.00-0.0019) |
| Reverse Idler Gear End Play mm (in) | 0.1-0.2(0.0039-0.0078) |
| Fifth/Reverse Hub End Play mm (in) | 0.00-0.05(0.00-0.0019) |
| Countershaft Reverse Gear End Play mm (in) | 0.25-0.35 (0.0098-0.0137) |
| LUBRICANT | |
| Automatic Transmission Fluid | MERCON IV or M-lll |